Common Issues Requiring Flat Roof Repair Services

Flat roof repair services can provide you with a lot of good support when you own an older flat roof or your roof was damaged by bad weather. The following are just some of the instances in which you can and often should consider hiring a flat roof repair service to inspect or mend your roof:

• Roof leaks are perhaps the most common types of problems you can run into when you own a flat roof. Whether you have a large commercial building or a small home that has a leaking flat roof, it’s best to consider a professional service to ensure not only that the leak is repaired, but that it won’t come back again.
• When you notice that your AC is working overtime and the top floors are experiencing greater condensation, it’s worth calling in a roof repair specialist to check on your roof. Just like sloped roofing systems, flat roofs can also cause these problems and commercial flat roof repair Superior roofing contractors should be able to help you with it.
• Flat roof repair may be required when your flat roof experiences impact damage. Hail damage is common in certain areas, and some flat roofs are more sensitive to it than others. If your roof is older, it’s usually best to hire a local roofer to inspect it, even if there is no visible damage that you can see upon first glance.

The post Common Issues Requiring Flat Roof Repair Services appeared first on NWR.

Why Flat Roofs Are the Preferred Option for Commercial Buildings

The great thing about commercial roofs is that, not only do they cost less, but they have a lot of amazing practical benefits that can be used to profit from them being installed on a commercial building. Whether you’re running a small shop, or you own a large office building, there are a lot of ways that your flat roof can actually come in handy, and its practical benefits will make owning, maintaining and keeping it in good condition a total breeze.

Trusted commercial roofing Castle Rock experts confirm that one of the top reasons why flat roofs are popular for commercial buildings is that they keep construction and maintenance costs low. There is less surface area required than for a sloped roof, and with most membrane roofs, repairs take less time and money.

Flat roofs also allow a great opportunity for improved networking and marketing. You can prepare the space for events, ensure that your guests enjoy the view and even install a rooftop swimming pool.

Finally, energy efficiency is a significant benefit as well. When you have a flat commercial roof, you can ensure that there is enough space for even larger HVAC units, keep your use of heating and cooling systems to a minimum and save a fair amount of money on your electric and gas bills.

The post Why Flat Roofs Are the Preferred Option for Commercial Buildings appeared first on NWR.

Metal Roofing – How to Retrofit the Flat Roof of a Commercial Building

If you want your building to be protected from the elements, you have to consider the option of either replacing or upgrading it. Although replacement is often recommended when you have a specific type of roof in mind, or when the old one is heavily damaged, retrofitting is actually a cost-effective and overall superior solution for improving everything from thickness and elongation, to making your roof resistant to hail, wind uplift and heavy foot traffic.

One of the mistakes some building owners make is to opt for tearing off the old roof and installing a new a single-ply roofing system that has to be held down by lots of screws and actually reduces the waterproofing thickness of their roofs. Such a retrofit is counterproductive, and can even lead you to waste a lot of money.

Upgrading to a metal roof can be done easily by simply adding new metal panels on top of your existing flat roof area. Although the flat roof requires some preparation for the process, you’ll find that a top notch metal roofing Denver team can get everything done quickly. Metal roof panels can even be installed on top of existing flat metal roofing installations, as long as the old roof is not too badly damaged.

If you want to learn more about the process of retrofitting your roof, and even if you just want some additional coating to protect your roof from UV radiation during the summer, the best course of action is to contact your local commercial roofing experts and ask them about the process directly.

The post Metal Roofing – How to Retrofit the Flat Roof of a Commercial Building appeared first on NWR.

The Advantages of Metal Roofing on a Flat Commercial Roof

Although EPDM, TPO and other popular commercial flat roofs are quite resilient and efficient, some roofers will say that their money will almost always be on commercial metal roofing.

Metal roofing has the advantage that it’s very resilient, fireproof and low-maintenance. If you struggled with frequent repairs in the past, and you need a flat roof that is more robust and easily capable to withstand strong and violent storms, then a metal panel roof is your best option. Commercial metal roofing is designed to be even more resilient than some residential roofing systems, so you’re pretty much looking at at least 50 years of effective use without the need for major repairs.

If the roof was installed properly by dedicated metal roofing Aurora installation experts, it will also require less maintenance to do its job properly. Even if neglected, a metal roof will withstand water damage, hail and snow very easily, and it will deal with  wide temperature differences as well. In places like Colorado, where the climate implies frequently changing temperatures, poor energy efficiency and wear and tear can be issues that most flat roofs will have. However, that won’t be the case for metal roofing systems, which are also designed to keep the pressure off your HVAC system, whether it’s summer or winter.

The post The Advantages of Metal Roofing on a Flat Commercial Roof appeared first on NWR.

Flat Roof Repair on Commercial Buildings – Pitfalls to Avoid

Are you in need of flat roof repair? If you own a commercial building and want to take care of the problem as quickly and efficiently as possible, local Aurora commercial roofing experts can help. However, as you will see, it’s also very important that you stay informed and avoid some of the more problematic roof repair pitfalls that could arise:

• Never underestimate the needs of your flat roof, even if it seems like it’s a simple installation that’s mostly low-maintenance. You should always ask your roofer if the roof you own has any special needs or requirements, and if you need to call them in if you notice any specific types of damage.
• Even if you’re just going up to the roof to perform a quick, routine inspection of it, avoid doing so without the proper safety equipment. Ideally, if you notice a leak and want to see how extensive the damage is, call your local trusted flat roof repair Aurora contractors in for a complete inspection. They can evaluate the situation accurately and safely.
• Avoid hiring an inexperienced roofer for any complicated repair jobs. These might include fixing a larger leak, removing debris and rebuilding a roof that has been heavily hit by a recent storm, performing emergency repairs, or handling tricky preventive repairs that could lead to more expensive damage, if not done properly.

The post Flat Roof Repair on Commercial Buildings – Pitfalls to Avoid appeared first on NWR.

How to Avoid Frequent Roof Repair on Your Commercial Building

Unlike in the case of residential roofing systems, commercial roofing can be more difficult to deal with in most cases. While repair and installation work can be extensive when you own a large building – and even more so for several buildings – even regular maintenance might be a problem if your roof is older and requires constant work to keep it in good condition.

When it comes to preventing frequent flat roof repair for your commercial building, the following tips from Superior commercial roofing pros will help a lot:

1. Avoid hiring an inexperienced roofer for even basic roof maintenance and preventive repairs. The result could be that you’ll need to pay more on frequent repairs down the line. Always hire experienced BBB accredited Superior commercial roofing professionals for excellent services you can trust.
2. Perform a few basic visual inspections after each big storm to make sure there are no leaks and that the roof hasn’t sustained any significant damage. Take note of any damage you might notice, and call your roofer to ask if you should have them over for something like that.
3. Get your roof inspected at least once a year, and perform basic maintenance twice every year for best results.
4. Keep track of the special requirements and lifespan of the specific type of roof you own. Remember that each material is different, and the presence or absence of proper coating, or the use of a cool roof in predominantly warmer weather (or vice versa) can have a significant impact on how often your roof is damaged throughout the years.

 

 

The post How to Avoid Frequent Roof Repair on Your Commercial Building appeared first on NWR.

Commercial Roofing Options – Which One Is the Best for You?

Whether you just bought an older building and would like to restore it, or you’re thinking of renovating your existing buildings and thinking that a new roof should be on the menu, there are many things that could go wrong. Without the help of a committed and professional commercial roofing service, your options will be limited and most likely they’ll also carry a lot of risk.

Repairing and upgrading an older roof is one option that budget friendly flat roof repair Castle Rock specialists might recommend. However, this solution depends on how old or damaged your existing roof is. Would it even survive for more than a few years after the work is completed?

The next option is to have it removed and replaced. Most roofing systems can be installed in the place of most others, but sometimes there is a need to prepare the space properly. TPO roofing and advanced new roofs like green roofing systems can be more elaborate, requiring a greater amount of work and often being somewhat more expensive. EPDM and flat metal roofing, on the other hand, is a lot more convenient and easy to install.

You’ll find it’s always a good idea to make sure that you talk to a professional and experienced NWR Commercial roofing contractor before you choose any particular option. They can evaluate your existing roof and advise you on which solution to consider to not only minimize the costs, but also ensure a lasting outcome.

The post Commercial Roofing Options – Which One Is the Best for You? appeared first on NWR.